netstat

Using the netstat command

The netstat command displays the contents of various network-related data structures for active connections.

• netstat -in command
  This netstat function shows the state of all configured interfaces.
• netstat -i -Z command
  This function of the netstat command clears all the statistic counters for the netstat -i command to zero.
• netstat -I interface interval
  This netstat function displays the statistics for the specified interface.
• netstat -a command
  The netstat -a command shows the state of all sockets.
• netstat -m
  This netstat function displays the statistics recorded by the mbuf memory-management routines.
• netstat -M command
  The netstat -M command displays the network memory's cluster pool statistics.
• netstat -v command
  The netstat -v command displays the statistics for each Common Data Link Interface (CDLI)-based device driver that is in operation.
• netstat -p protocol
  The netstat -p protocol shows statistics about the value specified for the protocol variable (udp, tcp, ip, icmp), which is either a well-known name for a protocol or an alias for it.
• netstat -s
  The netstat -s command shows statistics for each protocol (while the netstat -p command shows the statistics for the specified protocol).
• netstat -s -s
  The undocumented -s -s option shows only those lines of the netstat -s output that are not zero, making it easier to look for error counts.
• netstat -s -Z
  This is an undocumented function of the netstat command. It clears all the statistic counters for the netstat -s command to zero.
• netstat -r
  Another option relevant to performance is the display of the discovered Path Maximum Transmission Unit (PMTU). Use the netstat -r command to display this value.
• netstat -D
  The -D option allows you to see packets coming into and going out of each layer in the communications subsystem along with packets dropped at each layer.